K-12 & Municipal/Government

Description: Charlotte Mecklenburg Schools project to upgrade the BAS controls for 101,000 sq.ft. elementary school that servicing over 400 students.

Services Provided:  TMG was contracted as the Engineer of Record to provide professional engineering services for the complete replacement of outdated pneumatic and legacy DDC controls. The old controls are being replaced with new BACnet DDC control systems and enhanced, web-based graphical user interfaces integrated into the master CMS system. TMG's scope of work involved evaluating the condition of existing MEP, lighting, and controls systems, researching original MEP design criteria, submittals, and equipment sizing, reproducing all architectural base sheets and MEP layouts in CAD format from scanned existing conditions documents, producing controls schematics / points lists / sequences of operation, developing project specification packages, and producing mechanical designs where necessary to improve system performance, efficiency, and indoor air quality. TMG is also contracted to provide construction administration and full MEP and BAS commissioning services through project completion.

Description: Charlotte Mecklenburg Schools project to upgrade the BAS controls for a 97,000 sq.ft. elementary school that services over 530 students.

Services Provided:  TMG was contracted as the Engineer of Record to provide professional engineering services for the complete replacement of outdated pneumatic and legacy DDC controls. The old controls are being replaced with new BACnet DDC control systems and enhanced, web-based graphical user interfaces integrated into the master CMS system. TMG's scope of work involved evaluating the condition of existing MEP, lighting, and controls systems, researching original MEP design criteria, submittals, and equipment sizing, reproducing all architectural base sheets and MEP layouts in CAD format from scanned existing conditions documents, producing controls schematics / points lists / sequences of operation, developing project specification packages, and producing mechanical designs where necessary to improve system performance, efficiency, and indoor air quality. TMG is also contracted to provide construction administration and full MEP and BAS commissioning services through project completion.

Description: The Central Heating Plant is a power station located at 325 13th Street, SW in the Southwest Federal Center neighborhood of Washington, D.C. which serves most of the United States federal government buildings near the National Mall.

Services Provided:  TMG provided Demonstration of Performance Testing of 16,000 Ton Central Utility Chilled Water Plant to verify proper performance and verification of instrumentation and meter accuracy.
 

Description:  This 104,000 sq.ft. CRC is part of the redevelopment occurring at the old North Park Mill site located at the approximate corner of Eastway Drive and North Tryon Street in Charlotte. The center will offer a multitude of previously separated County health and human services at a single location.

Services Provided:  TMG is the Cx Sub-consultant for SKA Consulting Engineers responsible for all MEP Cx throughout all project phases for all MEP Cx and post-acceptance phase development of the Systems Manual and O&M Manual.
 

Description: This 208,271 sq.ft. LEED® Gold building operates around-the-clock. This facility is a first-class center, with first-class technology and operations that supply essential satellite data to forecasters to produce the most accurate weather and climate projections possible. This facility has a significant role in predicting where hurricanes will form, and when and where they will strike.  TMG was hired to provide necessary documentation for GSA IT to develop an IGE and scope of work for controls interface upgrade to Niagara.

Services Provided: TMG's scope of services provided were Identification of all IP addressable controllers in the building, documentation of MAC addresses for existing devices, existing device IP addresses, and current GSA switch names, IP addresses, and locations. We assisted with integration vendor selection. Gathered existing equipment diagrams and verified accuracy. Reviewed integration vendor’s engineering submittal. Performed graphics and programming review. Supported the integration team with graphics and programming commissioning

Photo Credit: Maxwell McKenze

Description: These Federal buildings include the Customs House and Courthouse which are a part of the Savannah National Historic Landmark District.  Built in the late 1800s/early 1900s, they serve as a beautiful and readily identifiable part of Savannah’s beautiful downtown district.

Services Provided: O&M Federal contractor for complete O&M

Photo Credit: George Lansing Taylor Jr.

Description:  In support of the Agricultural Research Service mission, the research program of the U. S. National Poultry Research Center is focused on ensuring & improving food and feed safety, and improving food and crop quality.  The Russell Research building is a total of  302,306 sqft.  The Southeast Poultry Research Laboratory is 25,783 sqft.

Services Provided: O&M Federal contractor for complete Operations & Maintenance.

Description: Building Controls Integrator for a 98,940 SF elementary school contracted by Maryland Stadium Authority.

Services Provided: TMG was contracted as the building controls integrator to coordinate the complete controls integration of manufacturer equipment that included 116 Variable Refrigerant Flow indoor Fan coil units and 11 Variable Refrigerant Flow outdoor condensing units, 68 VAV's, 3 DOAS, and 2 RTUs as well as other equipment. The integration of this equipment including developing application specification sequences for all of the equipment to operation as a complete system. TMG also performed the installation, checkout and commissioning of all of the controls equipment and integrated to a Siemens Desigo Optic Building Automation System.